NYC KDS 1 x 4 & 2 x 4 LAY-IN SERIES

An everyday drop-in fixture

SPECIFICATIONS:

CONSTRUCTION: Die formed in 20 gauge, embossed for maximum rigidity with rounded side flanges for safety. Four corner tie points for safety wire support provided.

FINISH: High reflective baked white enamel, assuring durability and excellent color retention.

BALLAST: All Octron T8 ballasts are HPF. Magnetic ballasts are Class “P” and NPF rated up to 48”. Two light 48” units and above are HPF. All have auto thermal reset. 120 volt standard UL listed. Other ballasts available - see options.

LENS: Flat acrylic prismatic diffuser in hinged door for easy relamping and cleaning. The lens is fits into removable doorframe. Various parabolic retrofit one-piece cell configurations can be used in place of flat prismatic standard lens and door. Cell sizes range from ½”x ½ ” to 18 cell parabolic patterns.

REFLECTOR: Various reflectors are available to direct or shield the light.

APPROVALS: All fixtures bear IBEW and UL labels.

ORDERING INFORMATION

MAGNETIC BALLAST OCTRON BALLASTS

(T12 LAMPS) (T8 LAMPS)

CATALOG # LAMPS CATALOG # LAMPS

LI240/1X4KD (2) F40T12 OLI232/1X4KD (2) F32T8

LI340/1X4KD (3) F40T12 OLI332/1X4KD (3) F32T8

OLI432/1X4KD (4) F32T8

LI240/2X4KD (2) F40T12 OLI232/2X4KD (2) F32T8

LI340/2X4KD (3) F40T12 OLI332/2X4KD (3) F32T8

LI440/2X4KD (4) F40T12 OLI432/2X4KD (4) F32T8

OPTIONS: PREFIX SUFFIX

EL: ELECTRONIC T12 BALLAST 277: 277 VOLT BALLAST

HR: HEAT REMOVAL VENTILATED BODY DM: DIMMING BALLAST

(36” & 48” UNITS ONLY)

EME: EMERGENCY BACK UP BALLAST

LT: LOW TEMP BALLAST

(36” & 48” UNITS)

REG: REGRESSED DOOR

W: WHIPS (NYC)

REF: MIRROR REFLECTOR

NYC KDS 1 x 4 AND 2 x 4 LAY-IN SERIES